-40%

*NOB* Huawei LE0DX16SFC00-16-Port 10GBASE-X Interface Card (FC, SFP+)

$ 1742.4

Availability: 15 in stock
  • Brand: Huawei
  • Network Ports: SFP
  • Condition: New in open box.
  • All returns accepted: ReturnsNotAccepted

    Description

    New in open box.
    LE0DX16SFC00
    -16-Port 10GBASE-X Interface Card (
    FC
    , SFP+)
    Version Mapping
    Table 8-712
    Switch chassis and software versions matching the card
    Card Name
    S9300 Chassis
    S9300E Chassis
    LE0DX16SFC00
    S9303, S9306 and S9312 chassis: supported in V100R006C00 and later versions
    S9310 chassis: supported in V200R010C00 and later versions
    Supported in V200R001C00 to V200R013C00
    Introduction
    The
    LE0DX16SFC00
    can be installed in:
    Slots 01 to 03 in an
    S9303
    chassis.
    Slots 01 to 06 in an
    S9306
    chassis.
    Slots 01 to 10 in an
    S9310
    chassis.
    Slots 01 to 12 in an
    S9312
    chassis.
    Slots 01 to 03 in an S9303E chassis.
    Slots 01 to 06 in an S9306E chassis.
    Slots 01 to 12 in an S9312E chassis.
    Figure 8-313
    Appearance of the
    LE0DX16SFC00
    Functions
    Table 8-713
    Functions of the
    LE0DX16SFC00
    Function
    Description
    Basic function
    Provides sixteen 10GE BASE-X optical ports for data transmission and switching.
    Distributed forwarding
    Performs concurrent data forwarding using a distributed data plane.
    Hot swapping
    The
    LE0DX16SFC00
    is hot swappable.
    Indicators and Ports
    Figure 8-314
    Indicators on the
    LE0DX16SFC00
    panel
    Table 8-714
    Indicators on the
    LE0DX16SFC00
    panel
    Number
    Indicator
    Color
    Description
    1
    ACT indicator of a lower optical port
    Yellow
    Blinking: The port is transmitting and receiving data.
    2
    ACT indicator of an upper optical port
    3
    LINK indicator of a lower optical port
    Green
    Steady on: A link has been established on the port.
    4
    LINK indicator of an upper optical port
    5
    RUN/ALM: running status indicator
    Green
    Steady on: The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running.
    Slow blinking: The card software is running properly.
    Fast blinking: The card software is starting.
    Red
    Steady on: The card has failed and the fault requires manual intervention.
    Yellow
    Steady on: The card is powered off. (For example, the card has been forcibly powered off using the
    power off
    command or is about to start.)
    Figure 8-315
    Ports on the
    LE0DX16SFC00
    panel
    1
    Sixteen 10GBASE SFP+/1000BASE-X optical ports
    10GBASE SFP+/1000BASE-X optical port
    10GBASE SFP+/1000BASE-X optical ports support 10GE and GE auto sensing.
    Table 8-715
    Optical port attributes (GE optical module)
    Attribute
    Description
    Connector type
    SFP+
    Optical port attributes
    Depend on the SFP optical module used.
    For the optical modules supported by the
    LE0DX16SFC00
    and their attributes, see
    GE eSFP Optical Modules
    ,
    GE-CWDM eSFP Optical Modules
    , and
    GE-DWDM eSFP Optical Modules
    .
    Standards compliance
    IEEE802.3z
    Frame format
    Ethernet_II, Ethernet_SAP, Ethernet_SNAP
    Network protocol
    IP
    Table 8-716
    Optical port attributes (10GE optical module, high-speed cable or SFP+ optical cable)
    Attribute
    Description
    Connector type
    SFP+
    Optical port attributes
    Depend on the
    SFP+ to SFP+ high-speed cable
    (1 m, 3 m, 5 m, 10 m)
    ,
    QSFP+ to 4*SFP+ high-speed cable
    (1 m, 3 m, 5 m)
    , SFP+ optical module, or
    SFP+ optical cable
    used.
    For the optical modules supported by the
    LE0DX16SFC00
    and their attributes, see
    10GE SFP+ Optical Modules
    ,
    10GE-CWDM SFP+ Optical Modules
    and
    10GE-DWDM SFP+ Optical Modules
    .
    NOTE:
    The
    S9303, S9306 and S9312
    do not support OSX040N01, SFP-10G-ER-1310, SFP-10G-ZR, 10GE-CWDM SFP+ Optical Modules and 10GE-DWDM SFP+ Optical Modules.
    Standards compliance
    IEEE 802.3ae
    Frame format
    Ethernet_II, Ethernet_SAP, Ethernet_SNAP
    Network protocol
    IP
    Table 8-717
    Optical port attributes (copper module)
    Attribute
    Description
    Connector type
    SFP
    Optical port attributes
    Depend on the SFP copper module used.
    For details on the copper modules supported by the cards and attributes of the copper modules, see
    GE SFP Copper Modules
    (1000 Mbit/s rates).
    Standards compliance
    IEEE 802.3ab
    Frame format
    Ethernet_II, Ethernet_SAP, Ethernet_SNAP
    Network protocol
    IP
    Specifications
    Table 8-718
    Specifications of the
    LE0DX16SFC00
    Item
    Description
    Physical specifications
    Dimensions (H x W x D): 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.)
    Weight: 2.60 kg (5.73 lb)
    Maximum power consumption: 150 W
    Environment specifications
    Operating temperature: 0°C to 45°C (32°F to 113°F)
    Relative humidity: 5% RH to 95% RH (noncondensing)
    Storage temperature: -40°C to +70°C (-40°F to +158°F)
    Ordering Information
    Card ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.
    Table 8-719
    Ordering information
    Part Number
    Card Description
    Card Model
    03021JUM
    16-port 10GBASE-X interface card (
    FC
    , SFP+)
    LE0DX16SFC00
    SHIPPING
    Your item will be professionally and carefully packed and shipped promptly. All orders will normally be shipped one day after the order is placed. Orders are not usually processed for shipment on weekends and official holidays.
    - All orders will be provided with a trackable tracking number
    - 3-4 days handling time
    - Check shipping fee for your area
    RETURN
    A customer has 14 days to request the return after the product is delivered. The customer can request the refund or return for any reason in 14 days, but the customer should pay the return shipping cost.
    For below reasons, we guarantee 100% return.
    - The product is not same as description such as "New in open box", "Huawei original"
    - The product is not the authentic item.
    - The product is damaged or broken
    Additionally  Return Policy / Warranty Details (After 14 days after receiving):
    Defective items can be returned for refund or exchange, if found not to be defective or returned for any other reason then "defective" will be subject to 20% restocking fee (example - "do not need the item" or "bought the wrong part for my system "or" did not read the whole description and expected something else to come with it "etc ..)
    PAYMENT
    We accept payments through PayPal only.
    if you want to discuss the detail please contact us
    **Any form of tax from buyer's country is not included. We are not responsible for
    tax
    tax issue of buyer's country.